Product DetailsThe ADG706 andADG707are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The ADG706switches one of 16 inputs (S1–S16) to a common output, D, as determined by the 4-bit
Product DetailsThe MAX4638/MAX4639 are single 8:1 and dual 4:1 CMOS analog multiplexers/demultiplexers (muxes/demuxes). Each mux operates from a single +1.8V to +5V supply or dual ±2.5V supplies. These devices feature 3.5Ω on-resistance (RON)
Product DetailsThe ADG758 and ADG759 are low voltage, CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG758 switches one of eight inputs (S1–S8) to a common output, D, as determined by the
Product DetailsThe ADG621 is a monolithic, CMOS, single-pole, single-throw (SPST) switch. The ADG621 conducts equally well in both directions when on. The ADG621 contains two independent switches. The ADG621 is a normally open switch.The ADG621 offers low
Product DetailsThe DG411F/DG412F/DG413F are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard nonprotected DG411/DG412/DG413. These new switches feature fault-protected inputs and ra
Product DetailsTheADG819is a monolithic, CMOS SPDT (single pole, double throw) switch. This switch is designed on a submicron process, that provides low power dissipation yet gives high switching speed, low On Resistance and low leakage currents. Low-powe
Product DetailsThe ADG901/ADG902are wideband switches that use a complementary metal-oxide semiconductor (CMOS) process to provide high isolation and low insertion loss to 1 GHz. The ADG901is an absorptive (matched) switch with 50 Ω terminated shunt
Product DetailsThe ADG836 is a low voltage complementary metal-oxide semiconductor (CMOS) device containing two independently selectable single-pole, double-throw (SPDT) switches. This device offers an ultralow on resistance of less than 0.8 Ω over the fu
Product DetailsThe ADG839 is a low voltage CMOS device containing a single-pole, double-throw (SPDT) switch. This device offers ultralow on resistance of less than 0.6 Ω over the full temperature range. The ADG839 is fully specified for 1.8 V, 2.5 V, and
Product DetailsThe ADG794 is a monolithic CMOS device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on-resistance varia
Product DetailsThe ADG1334 is a monolithic CMOS device comprising of four independently selectable SPDT switches designed on a CMOS process.When the switches are on, each switch conducts equally well in both directions and has an input signal range that e
Product DetailsThe ADG1233 andADG1234are monolithiciCMOS®analog switches comprising three independently selectable single-pole, double throw SPDT switches and four independently selectable SPDT switches, respectively.All channels exhibit break-before-
Product DetailsThe ADG1219 is a monolithiciCMOS®device containing an SPDT switch. An EN input is used to enable or disable the device. When disabled, all channels are switched off. When on, each channel conducts equally well in both directions and has
Product DetailsThe ADG1201 is a monolithic complementary metal-oxide semiconductor (CMOS) device containing a single-pole, single-throw (SPST) switch designed in aniCMOS®process.iCMOS is a modular manufacturing process combining a high voltage CMOS an
Product DetailsThe ADG1606 andADG1607are monolithiciCMOS®analog multiplexers comprising of 16 single channels and eight differential channels, respectively. The ADG1606 switches one of 16 inputs to a common output, as determined by the 4-bit binary ad
Product DetailsThe ADG1438 andADG1439are CMOS analog matrix switches with a serially controlled 3-wire interface. The ADG1438 is an 8-channel matrix switch, and the ADG1439 is a dual 4-channel matrix switch.The ADG1438/ADG1439 use a versatile 3-wire seria
Product DetailsThe MAX14895E integrates level-translating buffers and features RED, GRN, and BLU (RGB) port protection for VGA signals.The device has horizontal sync (SYNCH_) and vertical synch (SYNCV_) translating buffers that convert low-level CMOS inpu
Product DetailsThe ADG5212 / ADG5213 contain four independent single-pole/single-throw (SPST) switches. The ADG5212 switches turn on with Logic 1. The ADG5213 has two switches with digital control logic similar to that of the ADG5212; however, the logic i
Product DetailsThe MAX14778 dual 4:1 analog multiplexer supports analog signals up to ±25V with a single 3.0 to 5.5V supply. Each multiplexer has separate control inputs to allow independent switching, making the device ideal for multiplexing diffe
Product DetailsTheADG5236is a monolithic CMOS device containing two independently selectable single-pole/double throw (SPDT) switches. An EN input on the LFCSP package enables or disables the device. When disabled, all channels switch off. Each switch con
News